Description Of Linear Controls - THOMSON OCP 42 Manuel D'utilisation

164
2.3 - DESCRIPTION OF LINEAR CON-
TROLS
ADJUST: Adjusts the value of the parameter displayed
and, on the display, selects whether the control is gradual
(corresponding operation key lit).
R, G, B PARTIAL GAINS: R, G, B video amplitude
adjustment.
NOTE: If the ASSIGNED lights are lit, these controls
become the settings for the displayed range parameter.
E.g.: R, B GAMMA if the GAMMA range is
displayed.
R, G, B PARTIAL BLACKS: R, G, B video black level
adjustment. Refer to INSTALLATION chapter, 1.7.3 -
Setting up the OCP paragraph.
NOTE: If the ASSIGNED lights are lit, these controls
become the settings for the displayed range parameter.
E.g.: R, G, B FLARE if the BLACK range is displayed.
IRIS: Iris aperture (diaphragm) adjustment
.
MASTER BLACK: Master black adjustment.
MASTER BLACK: Master black adjustment (OCP 50).
IRIS: Iris aperture (diaphragm) adjustment (OCP 50).
THOMSON OCP 42/OCP 50
User manual
Chapter 2 -OCP 42/OCP 50 Operating Instructions

Description of linear controls

CTRL
DIAG
PRESET GAIN FILTERS DETAIL
STORE DFZ BLACK COLOUR
RECALL KNEE SHUTTER GAMMA
BLACK BAL
LIMIT
ASSIGNED
GAIN
ASSIGNED
BLACK
ENABLE
BLACK
LEVEL
B1500M24LA
September 2000
NEXT
SKIN MEMORY
WHITE BAL
LIMIT
ASSIGNED
ASSIGNED
FINE
AUTO IRIS ADJUST
EXTENDER
IRIS
BLACK
LEVEL
OCP 42
EXTENDER
IRIS
OCP 50