THOMSON OCP 42 Manuel D'utilisation page 142

142
With the 2nd «PRESET» page displayed, pressing of
NEXT displays the 3rd «PRESET» page.
ERAS E CARD
L'appui simultané sur les touches PRESET et :
• SKIN 1: SKIN 1 setting «Preset» to maintenance values.
• SKIN 2: SKIN 2 setting «Preset» to maintenance values.
• ERASE CARD: Erase the memory card datas. For
exemple, this commande is used for transform a CAMERA
CARD into a STUDIO CARD and vice versa. For the
memory card use description, refer to the paragraph 2.7 -
OCP 42/OCP 50 memory card & memory key.
With the 3rd «PRESET» page displayed, pressing of NEXT
displays the 4th «Preset» page.
PRES E T +
BAR / WH T / B L K / CA L L
This page informs the operator that there are other types of
PRESET (Direct access presets).
2. Direct access PRESET:
Simultaneous operation of the:
• PRESET and BARS: «Preset» of all operational settings.
• PRESET and WHITE BAL: Presets the PARTIAL R,
G, B GAIN LEVELS and white balance (3100°K).
• PRESET and BLACK BAL buttons, «Preset» of the R,
G, B PARTIAL BLACK levels.
• PRESET and CALL if necessary, extinguishes the
CALL lights on ALL the connected panels.
• PRESET and ACTIV forces the panel to the ACTIV
mode (multi-panel operation if this panel has a higher level
than the active panel).
• PRESET and ENABLE forces the IRIS MASTER
BLACK controls to the ENABLE mode (multi-panel
operation if this panel is of lesser priority than the panel on
the ENABLE mode).
THOMSON OCP 42/OCP 50
User manual
Chapter 2 -OCP 42/OCP 50 Operating Instructions
S K I N 1 S K I N 2
o t h r p r e s e t e
p r e s s k e y s :
Description of pushbuttons
PRE ON AIR 1
VIEW
LOCK ACTIV CCU STATUS BARS SETTING
F1 F2 F3
EXIT
CTRL
DIAG
PRESET GAIN FILTERS DETAIL
STORE DFZ BLACK COLOUR
RECALL KNEE SHUTTER GAMMA
BLACK BAL WHITE BAL
LIMIT
ASSIGNED ASSIGNED
GAIN
ASSIGNED ASSIGNED
BLACK
ENABLE AUTO IRIS
B1500M24LA
September 2000
ON
AIR 2
CALL
F4
NEXT
SKIN MEMORY
LIMIT
FINE
ADJUST