THOMSON OCP 42 Manuel D'utilisation page 154

154
2.2.8.10 - GAMMA button
Used to make GAMMA range adjustments.
Press the button to display the 1st setting page:
This page is used to modify the following parameter:
• GAMMA: Stepped GAMMA value.
The «!» indication, if displayed before GAMMA, indicates
that at least one of the following parameters has been modi-
fied since the last time GAMMA was selected: FINE
GAMMA, GAMMA R, GAMMA B (parameters acces-
sible in the 2nd GAMMA setting page).
With the first Gamma page displayed, press NEXT to
display the 2nd Gamma setting page:
FI N E GAMMA
GAMMA R
This page is used to modify the following parameters:
• FINE GAMMA: After selection with the button above
«FINE GAMMA»:
- Continuous adjustment of R, G, B GAMMAS with the
ADJUST control.
- Adjustment of the partial R and B gammas with,
respectively, the red and blue partial gain controls.
• GAMMA R, GAMMA B: After selection with one of the
corresponding buttons:
- Continuous adjustment of GAMMAS R, B with the
ADJUST control.
- Adjustment of the partial R and B gammas with,
respectively, the R and B partial gain controls.
With the second Gamma page displayed, press NEXT to
return to the 1st Gamma setting page.
THOMSON OCP 42/OCP 50
User manual
Chapter 2 -OCP 42/OCP 50 Operating Instructions
GAMMA
X . X X
X X
X X X X
GAMMA B
Description of pushbuttons
PRE ON AIR 1
VIEW
LOCK
ACTIV CCU STATUS BARS
F1 F2 F3
EXIT
CTRL
DIAG
PRESET GAIN FILTERS DETAIL
STORE DFZ BLACK COLOUR
RECALL KNEE SHUTTER GAMMA
BLACK BAL
LIMIT
ASSIGNED
ASSIGNED
GAIN
ASSIGNED ASSIGNED
BLACK
ENABLE
B1500M24LA
September 2000
ON
AIR 2
SETTING CALL
F4
NEXT
SKIN MEMORY
WHITE BAL
LIMIT
FINE
AUTO IRIS ADJUST