Using The Device For The First Time; Wifi Connection Via Wps; Establishing A Wifi Connection Using Lifestream Ii - Medion LIFE P61084 Mode D'emploi

8. Using the device for the fi rst time
• When using the device for the first time, bring the speaker near to the router if
possible, to ensure a perfect WiFi signal during setup. Then set up the speaker
within the range of the WiFi signal.

8.1. WiFi connection via WPS

If your router has a WPS button, you can easily connect the speaker to the network
using this button:
 Press and hold the WPS/RESET button at the back of the WiFi speaker for
approximately three seconds.
 Now press the WPS button on the WiFi router.
NOTE!
Please also refer here to the operating instructions for the router.
The device will now establish a connection with the network. During this process,
the operating LED flashes quickly.
• After successful connection, the operating LED is constantly lit white.
• The device can now play back audio signals from the network.
• The device saves the connection data so that it does not need to be entered
again the next time you switch on.

8.2. Establishing a WiFi connection using Lifestream II

If it is not possible to set up a network connection via WPS, use the LIFESTREAM II
app on your smartphone or tablet to establish a connection to the Internet or the
WiFi speaker.
 Switch on the WiFi speaker.
The operating LED flashes white.
 If the operating LED does not flash white, press the WPS/RESET button and hold
the WPS/RESET button until the operating LED begins to flash white.
 Start the selected app, tap 'Add Device' and follow the instructions.
 Select the suggested audio system 'MEDION XX-XX-XX' and tap 'Weiter' .
 Follow the subsequent instructions.
Once the WiFi speaker and its connection to the Internet have been successfully set
up, the operating LED is constantly lit white.
NOTE!
Your playback device must be located in the same 2.4/5-GHz WiFi
network as that in which the speaker is to be integrated.
DE
FR
NL
EN
77