Switching On The Effect Lighting; Using The Loudspeaker In Water; Switching Off - Medion MD 82294 Mode D'emploi

Switching on the effect lighting

Press the button to switch the effect lighting at the loudspeaker on or off.
Note
The light can only be switched on if the loudspeaker is switched on.
Excessive use of the light has a negative effect on the battery lifetime.

Using the loudspeaker in water

Caution
Even when operated with batteries, the transmitter must not be submerged
in water.
The electronic parts of the loudspeaker are protected against water. However, water
can collect beneath the loudspeaker cover and affect the sound.
Take the loudspeaker out of the water, turn it around and shake lightly to pour off
the water.
To thoroughly remove the water:
1. Press the cover with your thumbs at the indicated point.
2. Remove the cover and pour out the water.
3. Replace the cover firmly on the loudspeaker. Engagement must be audible and
perceptible.

Switching off

1. Press the On/Off switch
2. Switch off the audio device.
3. Switch off the transmitter by sliding the On/Off switch to OFF.
4. Disconnect the cable connection between the transmitter and the audio device.
5. Unplug the mains adapter of the transmitter.
Note
If the loudspeaker does not have radio contact to the transmitter for more
than 5 minutes, it will completely switch off automatically.
to switch off the loudspeaker.
Operation
UK
EN
ES
FR
IT
NL
15