Selecting The Radio Frequency; Setting Volume - Medion MD 82294 Mode D'emploi

Note
If radio contact is not established within 5 minutes, the loudspeaker switches
off completely.

Selecting the radio frequency

1. Set the CHANNEL switch of the
transmitter to any channel
number (1, 2 or 3).
2. Press the SCAN button on the
loudspeaker. It automatically
finds the radio frequency of the
transmitter. The power light
changes from green to blue.
Note
If the reception is disrupted, try another radio channel.
Set up the loudspeaker and the transmitter no further apart than 80 m free
field. Walls or other obstacles can decrease the range.

Setting volume

Use the VOL+ / – buttons on the loudspeaker to adjust the volume.
ein:
•
VOL+ increase volume
•
VOL– decrease volume
14
CHANNEL SWITCH
Key SCAN
English