Switching On The Loudspeaker And Transmitter; Status Of The Power Light - Medion MD 82294 Mode D'emploi

Switching on the loudspeaker and transmitter

1. Switch on the transmitter by
sliding the On/Off switch to ON.
The power light on the front will
light up green.
The device is now ready for
operation..
2. Switch on your audio device, select a medium loud volume and start the
playback. The power light of the transmitter will change to blue. The transmitter
is switched on.
3. Switch on the loudspeaker with
the On/Off switch
light of the loudspeaker will light
up green.

Status of the power light

If the power lights light up green, the devices are ready for operation.
If the power lights light up blue, the devices are switched on and active.
Ready to operate
(green power light)
•
Transmitter
The audio device was
switched off
•
No audio signal for more
than 4 minutes because
playback is not switched
on
•
Loudspeaker does not
receive a signal for more
than 4 minutes because it
is not switched on or
there is no radio contact
•
Loudspeaker
The radio contact to the
transmitter was
interrupted
. The power
Operation
Active
(blue power light)
•
Playback was started
•
The radio contact to the
transmitter was re-established
UK
EN
ES
FR
IT
NL
On/off switch
ON/OFF
On/off switch
13