Network Configuration; Network Requirements; Connecting To A Power Supply; Switching On The Speaker - Medion LIFE P61084 Mode D'emploi

6. Network confi guration
The speaker is connected to the network via WiFi. The speaker's WiFi antenna
receives the signals from the network router.

6.1. Network requirements

For the device to be able to access music files on the network, the network must
meet the following requirements:
• The router used for the network must have a DHCP server function so it can
automatically assign a network IP address to the device.
Otherwise set the DHCP function to manual in the Web interface.

7. Connecting to a power supply

 Connect the power plug of the supplied adapter (model HB40-1801800SPA) to
the DC socket on the device.

7.1. Switching on the speaker

 To turn on the power, switch on the device using the ON/OFF switch at the back.
The operating LED lights up red and the speaker is in standby mode.
 Briefly press the
The operating LED lights up white insofar as the speaker is already connected to a
WiFi network. If the speaker is not yet connected to a WiFi network, the operating
LED flashes white.

7.2. Ready mode

 Press and hold the
the speaker to ready mode.
The operating LED lights up red. In ready mode, the speaker keeps the network
connection so that it is immediately available the next time you switch on.
7.3. Switching off the speaker
 Switch off the speaker using the ON/OFF switch at the back.
The operating LED goes out.
76
/MODE: button to switch on the speaker.
/MODE: button for approximately three seconds to switch