Safety Instructions; Electric Shock; Magnetic Field; Hot Components - Wilo -Stratos MAXO Notice De Montage Et De Mise En Service

en
3.5

Safety instructions

Electrical current
DANGER

Electric shock!

The pump is operated electrically. An electric shock
may be a danger to life!
▪ Have only qualified electricians carry out work on electrical com-
ponents.
▪ Before all work, deactivate the power supply (if necessary, SSM and
SBM) and safeguard against accidental switch-on. Work on the
control module may only be started after 5 minutes have elapsed,
due to the dangerous residual contact voltage.
▪ Operate pumps exclusively with intact components and connection
cables.

Magnetic field

DANGER
Magnetic field!
The permanent magnet rotor inside the pump can
pose mortal danger for people with medical implants
(e.g. pacemakers) during dismantling.
▪ Never open the motor and never remove the rotor.
34
All manuals and user guides at all-guides.com

Hot components

▪ When in operation, only touch the user interface.
▪ Allow the pump to cool down before commencing any work.
▪ Keep highly flammable materials away.
4
4.1
➜ Fig. 1 and 2
4.2
Accessories have to be ordered separately.
▪ CIF modules
▪ PT1000 (Contact and immersion sensor)
▪ Counter flanges (DN 32 to DN 100)
▪ ClimaForm
See catalogue for detailed list.
4.3
Check delivery immediately for damage and completeness. Where
necessary make a complaint immediately.
WARNING
Hot components!
Pump housing, motor housing and lower module
housing can get hot and cause burns if touched.

Transportation and storage

Scope of delivery

Accessories

Transport inspection

WILO SE 2019-11