Zigo LEADER 1083 Serie Manuel De Montage Et D'utilisation page 91

Buckle
Middle Cross Webbing
Lower Cross Webbing
Infant Insert Shoulder Strap
ChildPod Lap Belt Buckle
Infant Insert Inner Lap Belt Buckle
ChildPod Crotch Belt Buckle
12.7.2 Install Shoulder Straps
1. Thread Infant Insert Shoulder Harness Straps through the proper slot to
fit your child.
2. Thread the Harness Strap under the corresponding Cross Webbing and
into the Buckle Adjuster on the Upper Cross Webbing.
3. Repeat with both Infant Insert Harness Straps and pull tight at the Buckle
Adjuster.
12.7.3 Connect Crotch Belt
1. Thread the Infant Insert Crotch Belt through the Crotch Belt Slot and
connect to corresponding ChildPod Crotch Belt.
2. Pull tight.
12.7.4 Connect Lap Belts
1. There are two sets of buckles on the Infant Insert Lap Belt. Thread the
Inner Buckle through the Lap Belt Slot and connect to corresponding
ChildPod Lap Belt.
2. Repeat on both sides. Pull Outer Lap Belt Buckles to tighten.
91