Zigo LEADER 1083 Serie Manuel De Montage Et D'utilisation page 22

Convert to Carrier Bicycle Mode and check that the Brake Levers
do not interfere with the back of the ChildPod. This can limit your
steering.
3.4 Installing the LeaderLink® Post
3.2.5 Engage Front Straddle Wire Cable
Cable Yoke
Straddle Cable End
Cantilever Brake
22
!
WARNING!
LeaderLink®
Knob
Stem
Front Brake Cable
Cable Hanger
1. Remove all packaging
materials from Cycle.
2. Insert LeaderLink®
Knob into Cycle head
tube located in center
of Stem Clamp.
1. Locate the Cable
from the Front Brake
Lever that leads to
the Cycle Cantilever
Front Brake. Insert
Front Brake Cable
Housing into the slot
in the Cable Hanger,
and seat housing into
the recessed hole at
the end of the Cable
Hanger.
2. With one hand,
squeeze Cantilever
Brakes together and
hook the end of
the Straddle Cable
into slot in top of
Cantilever Brake Arm.
3. Center the Cable Yoke
on the Straddle Cable;
then test the brake
action.