Zigo LEADER 1083 Serie Manuel De Montage Et D'utilisation page 67

Adjusting Steering Limiter
In Carrier Bicycle Mode, the Steering Limiter stops the ChildPod wheels from
making contact with the side of the ChildPod. The Steering Limiter is located on
the ChildPod at the bottom of the Leader Link Post.
Adjust the wheel stop position by adjusting the Limiter Set Screw. The left
Limiter Set Screw (viewed from Captain's perspective) controls the left ChildPod
wheel and the right Limiter Set Screw controls the right ChildPod wheel.
1. With a wrench, loosen the appropriate Locking Nut.
2. Turn the handlebar in the appropriate direction and test stop position.
3. To stop wheel further away from the ChildPod, reposition the Limiter Set
Screw closer to the Stop Beam by turning right with an Allen wrench.
To stop the wheel closer to the ChildPod, reposition the Limiter Set Screw
closer to the Stop Beam by turning left with an Allen wrench.
4. Turn the handlebar in the appropriate direction and test stop position.
5. Lock Locking Nut.
LeaderLink Post
Stop Beam
Limiter Set Screw
Locking Nut
67