Zigo LEADER 1083 Serie Manuel De Montage Et D'utilisation page 53

Use this Restraint Harness at all times.
Use a Restraint Harness as soon as your child can sit unaided.
Avoid serious injury from falling or sliding out. Always use Restraint
Harness and Lap Belt.
Failure to seat single child in the center position could cause the
ChildPod® to tip over resulting in serious injury or death.
8.1.3 Expand your Zigo® Restraint System to accommodate two children:
Position Restraint Harnesses side-by-side to accommodate two (2) children. X2
only. (Optional Second Restraint Harness Required)
1. Remove Restraint Harness from the two center Double Bar Slides and from
Cross Webbing.
2. Install a Restraint Harness in the left position. Select the appropriate Restraint
Harness height and thread Restraint Harness Adjustment Straps through the
appropriate number of Cross Webbing Straps and into the Double Bar Slide.
3. Repeat Step 2 with second Restraint Harness in the position on the right.
Reposition Lap Belts
The center Lap Belts need to be repositioned to the outer Lap Belt Slots.
!
WARNING!
!
WARNING!
!
WARNING!
!
WARNING!
1. Remove Seat Back
Cushion and remove
Lap Belts from inner
Lap Belt Slots.
53