Zigo LEADER 1083 Serie Manuel De Montage Et D'utilisation page 63

3. If brake pad to hub contact is present, the Rear Wheel will stop spinning
quickly. If so, turn Barrel Adjustor clockwise to reduce friction.
4. Repeat on other side
Adjust Jogging/Parking Brake:
Do not turn the Barrel Adjustor at the ChildPod® hubs to adjust the Jogging/
Parking Brake.
1. On the Jogging Brake/Parking Brake lever located on the ChildPod® Pushbar,
turn the Barrel Adjustor counterclockwise. This will take up slack in the brake
cable line.
2. Watch the ChildPod® brake hub arms. When taking up slack, do not tighten to
the point where the brake hub arms move.
Adjust the Cycle Front Brake:
The Cycle Front Brake can only be adjusted by adjusting the brake pads.
1. Convert the Leader™ into Cycle Mode.
2. Do not adjust the Brake Lever Barrel Adjustor.
3. See Bicycle Manual.
9.7.2 LeaderLink® steering components
The Stem holds the alignment of the Handlebar to the Steerer fork of the Cycle.
The LeaderLink® Steering Interface translates movements of the Fork to the
ChildPod® Rear Wheels through the LeaderLink® Tie Rod and Drag Link Steering
System.
The Tie Rod connects the LeaderLink® Steering Interface to the Drag Link.
Adjustments to the TieRod Turnkey will turn BOTH ChildPod® Rear Wheels left
or right simultaneously. The Drag Link holds the ChildPod® Rear Wheels parallel
to one another. Adjustments to the Drag Link will splay the wheels outward or
inward.
Your Leader™'s steering alignment is set in the factory. We highly recommend
that you DO NOT adjust your Leader™'s Tie Rod and Drag Link Steering System
unless absolutely necessary. Seasonal maintenance of the Steering System's
locking nuts should prevent any alignment issues during the life your product.
However, if you feel it necessary to adjust your alignment, we recommend that
you adjust the alignment of the Stem to Steerer Fork only. Please take your Zigo®
Leader™ to your nearest Authorized Zigo® Dealer for realignment, or contact
Zigo® directly.
63