Several Base Stations - switel CD738 Mode D'emploi

All manuals and user guides at all-guides.com
16.3 Increasing the range
The range of the handset can be increased by placing additional base
stations in specific areas of the building or workplace (refer to Diagram
II).
1. Position the base stations so that the ranges of the individual
base stations overlap (refer to Diagram II). If necessary, test
the range of your handsets. Obstacles in buildings, such as
walls and ceilings, can restrict the range considerably.
2. Register your handset on all base stations used (refer to
Chapter 14.1).
3. Activate the automatic selection" of the base stations on the
handset (refer to Chapter 14.2).
4. If you currently have a call in Area C, this call cannot be
transferred to another base station in the Areas A, B or D.
Note: If you move too far from the respective area served by the
base station, the a icon flashes and acoustic warning signals
are issued. Move towards the relevant base station, otherwise
the call will be disconnected. The automatic transfer of a
handset from one base station to another takes approx. 2
seconds. The message SEARCH BASE appears in the display
during this period.
− Several Base Stations −
II
a
d
b
c
267