Temporary Tone Dialling; Chain Dialling - switel CD738 Mode D'emploi

All manuals and user guides at all-guides.com
6.13

Temporary tone dialling

If you only operate the telephone using the Pulse dialling method (refer
to Chapter 13.2), you can still make use of the advantages of the Tone
dialling method (e.g.: remote access of the answering machine).
During a call, you can temporarily switch to Tone dialling.
*
The character d appears in the display. When the call is ended, the
equipment automatically switches back to PULSE dialling.
6.14

Chain dialling

The chain dialling function is used in more complex telephone services,
e.g. for telephone banking, call−by−call or calling card procedures. The
function is used to transfer numbers stored in the phone book (e.g. bank
account number) while a call is actually in progress. It is also possible to
combine numbers for transfer from the phone book with numbers
entered manually (e.g. PIN number). The example below explains the
use of the chain dialling function in connection with a calling card
procedure.
Note: A calling card is a virtual telephone card. This telephone card
contains your secret PIN and calling card number.
X PHONEBOOK
X, V
Note: The message received from the calling card provider requests
your PIN.
Z
Note: PINs should not be stored in the phone book to protect them
from misuse.
OPTIONS , X PHONEBOOK , OK Select menu and confirm
X, DETAILS , DIAL
Note: You can link as many entries as necessary from the phone
book when a connection is established.
− Operation −
Press for 1 second during a call
Scroll up or down
Select the calling card number and
dial the number
Enter the PIN number
Select entry and confirm
235