Taking Two Calls - switel CD738 Mode D'emploi

All manuals and user guides at all-guides.com
6 Operation
6.1 Taking a call
When a call is received, both the handset and base station ring.
Remove the handset from the base station to take the call. To end the
call, replace the handset in the base station.
V
W
Note: When the handset rings, the ringing tone on the handset can
be switched off for this incoming call.
SILENT
6.2

Taking two calls

You will hear acoustic signals (call waiting) if a second call is received
while you are carrying out a telephone conversation. The number of the
second caller appears in the display. You can take the second call and
then switch between the two callers as necessary. One caller is put on
hold while you converse with the other.
V, 2
Note: Please contact your telephone network provider regarding
which recall (Flash) time must be set to use the supplementary
services (refer to Chapter 13.3).
Caution: The caller number display and call waiting signal are
optional services provided by your telephone network provider.
The caller number appears in the display if the service is of-
fered by your telephone network provider. Contact your net-
work provider for further information.
− Operation −
or
Take the call
End the call
Ringing tone is switched off
Switch to other caller
231