Combox Or Other External Answering Machines; Taking Two Calls - switel BDT 650 duo Mode D'emploi

All manuals and user guides at all-guides.com
Display Description
Flashing: The connection to the base station is poor.
r
Continuously on: The connection to the base station is good.
There are further letter in the phone book entry or numbers in the phone
C S
or
number to the right or left of those shown in the display. To display them,
press the
5.2 Switching the handset off and on
In order to save the standard batteries, press the
handset off. When the handset has been switched off, no incoming calls can be taken. The
base station, however, continues to signal incoming calls.
/
Press the button or place the handset in the base station. The handset searches for
the base station and two acoustic signals are issued. The display then indicates the
equipment is in Standby mode.
5.3

Combox or other external answering machines

If the telephone network provider has an external answering machine (e.g. the Combox)
k
available, the icon indicates new messages have been recorded for you. After playing
back all the messages on the external answering machine, the icon disappears from the
display.
Caution: The provision of an external answering machine and indication of
new messages via the
work provider. This function can only be used when your telephone network
provider actually offers the service. Contact your network provider for further
information.
5.4 Taking a call
When a call is received, both the handset and base station ring. Take the handset from the
base station and press the Call button
Note: It is possible to setup the telephone so that calls are automatically taken when
the handset is removed from the base station (refer to Chapter 9.4).
A connection is established. To end the call, replace the handset in the base station or
!
press the button on the handset.
5.5

Taking two calls

You will hear acoustic signals (call waiting) if a second call is received while you are
carrying out a telephone conversation. The number of the second caller appears in the
%
display. Press the
One caller is put on hold while you converse with the other.
Note: To use the supplementary services offered by your telephone network provider,
set the Flash time to 300 ms (refer to Chapter 10.2).
- Operation -
( )
and
k
icon are optional services from the telephone net-
!
.
2
and buttons in succession to switch between the two callers.
"
buttons or the button.
/
button for 2 seconds to switch the
131