Base Station Settings; Dialling Pause; Tone Or Pulse Dialling Mode; Changing The Pin Code - switel BDT 650 duo Mode D'emploi

All manuals and user guides at all-guides.com
10.3

Dialling pause

In order to insert a dialling pause in private branch exchanges, an automatic pause can be
entered after dialling the number for an outside line by pressing the
(
seconds. The
1 sec ( ), 1.5 sec (
PAUSE : 1
1. Press the Menu button
menu. Confirm by pressing the
2. Select the
3. Select the dialling pause required.
4. Confirm by pressing the
10.4

Tone or Pulse dialling mode

This feature enables the telephone to be operated in analogue exchanges (PULSE) as well
as in a new, digital exchanges (DTMF/TONE). Tone dialling is set at the factory.
1. Press the Menu button
menu. Confirm by pressing the
2. Select the
3. Select the setting required, namely
4. Confirm by pressing the
10.5

Changing the PIN code

The registration and deregistration of handsets are protected against unauthorised use by
a PIN code. The PIN code can contain up to eight digits. When delivered, the PIN code is
"0000". Proceed as follows to change the PIN code:
1. Press the Menu button
menu. Confirm by pressing the
2. Select the
3. Enter the base station PIN code (default setting:
0000).
Note: If the old PIN code is entered incorrectly, the process
is cancelled and the message
display.
4. Confirm by pressing the
146

- Base Station Settings -

button can be assigned one of the following dialling pauses:
PAUSE : 2
"
and use the
menu and confirm with the
PAUSE
"
button.
"
and use the
menu and confirm with the
DIALMODE
"
button.
"
and use the
menu and confirm by pressing the
CHANGE PIN
"
button.
), 2 sec (
PAUSE : 3
(
or
"
button.
"
(
or
"
button.
(DTMF) or
TONE
(
or
"
button.
appears in the
ERROR
(
button for 3
), 3 sec (
PAUSE : 4
)
button to select the
button.
)
button to select the
"
button.
.
PULSE
)
button to select the
"
button.
BUUUUMUR
PIN?
)
BASE
BASE
BASE