Remote Access - switel CD738 Mode D'emploi

− Telephone Answering Machine −
All manuals and user guides at all-guides.com
17.10

Remote access

Remote access enables the answering machine to be contacted from
any telephone which uses tone dialling in order to listen to messages
received and execute other functions.
17.10.1 Remote access security code
The answering machine is provided with a personal identification number
so only you can listen to incoming messages via the remote access
feature. The default security code set at the factory is 000".
17.10.2 Changing the remote access security code
Proceed as follows to change the security code:
J
P or O, J
P or O, J
P or O, J
17.10.3 Playing back messages via remote access
Z
YButton *, Z
Note: If an incorrect entry is made, the outgoing message is
repeated. If the security code is entered incorrectly three times,
the line is automatically disconnected.
Y
Button 2
Note: Other functions can be executed via the remote access
system within the following 8 seconds. Refer to the table in
Chapter 17.10.4.
Replace receiver
272
Press for 2 seconds
Change 1st digit and confirm
Change 2nd digit and confirm
Change 3rd digit and confirm
Dial your own phone number
Press during the outgoing message
and enter the PIN code
The Options menu is played
Play back message
End remote access