Troubleshooting; Error Correction - Parkside PWSA 18 A1 Traduction Des Instructions D'origine

All manuals and user guides at all-guides.com

Troubleshooting

Turn off the appliance and, before doing any servicing, remove the battery.
Problems
Device doesn't start
Grinding tools do
not move although
the engine is run-
ning
Engine is slower
and stops
Grinding disc does
not rotate smoothly,
abnormal noises
can be heard
Possible Cause
On/off switch ( 5) may be
defective
Engine faulty
Grinding disc nut (
loose
Workpiece, remaining work-
pieces or remaining grinding
tools block drive
Device is overloaded through
workpiece
Grinding disc nut (
loose
Grinding disc is defective

Error correction

Repair by Customer Care
Tighten grinding disc nut (
19) is
19) (see „Changing the grinding
disc")
Remove blockages
Reduce pressure on grinding tool
Workpiece unsuitable
Tighten grinding disc nut (
19 is
19 (see „Changing the grinding
disc")
Change grinding disc
GB
71