Playback - Esoteric SA-10 Manuel Du Propriétaire

1 Press the POWER button to turn the unit on.
power indicator
If the power indicator is red, press the ON button of the
remote control unit to turn the unit on.
2
Press the OPEN/CLOSE button (L) to open the tray.
3 Insert the disc label side up.
< Make sure the disc is centered in the tray in order to avoid
any malfunction or jamming of the tray or damage to the
disc.

Playback (1)

2
1 4 3 5
4 Press the OPEN/CLOSE button (L) again to close the
tray.
The tray will close. Take care that you don't catch your fingers
in the tray.
The unit reads the disc (this may take a little time).
5
Press the PLAY/PAUSE button (y/J) to start playback.
The playback indicator lights during playback.
playback indicator
13