8. Technical data
8.1. General
In this chapter you find the most important technical data of the range where your machine belongs.
8.1.1. Machine statement
See end of book - chapter 11 - Technical data.
8.2. General data
- Maximum reactive force of the sprinklers:
- Minimum water pressure (at LP entrance)
- Maximum water pressure (at LP entrance)
- Minimum water temperature
- Maximum water temperature
- Sufficient water supply at drinking water quality (Directive 98/83/EG)
- The use of an extra water filter is recommended
8.3. Accessories
1 x user manual
8.4. Vibration measurement (hand/arm) - rotating head
As previously mentioned, when using the rotating head of the cleaner (note: not all cleaners have a lance with
rotating head), the action values will be reached sooner. Below, a table is mentioned with the vibration intensity
and exposure time (in hours) of the lances with rotating head on a weekly basis.
The measurements were carried out in the capacity of an accredited laboratory.
This measurements were carried out according to the Royal Decree of 7 July 2005 and EN-ISO 5349:1.
ECN-M 110/13
ECN-M 160/16
ECN-M/T 160/22
ECN-M/T 160/30
ECN-M 220/16
ECN-M/T 220/22
ECN-T 220/30
ECN-M 260/16
ECN-T 260/22
ECN-T 320/18
Note: the version with reel reduces the vibration exposure time.
Increasing the water temperature (for ex.: through the hotbox) does not raises the vibration exposure time.
ECN-M/T/L : REV 0
Type
Vibration intensity
(AeqSum)
6.0 m/s²
0.3 m/s²
9.3 m/s²
5.5 m/s²
8.9 m/s²
10 m/s²
5.6 m/s²
8.9 m/s²
9.8 m/s²
0.3 m/s²
<60N
200 kPa (2 bar)
300 kPa (3 bar)
1 °C
See technical data
Exposure time (action) on
weekly base
7 h
+ 40 h
2.52 h
8.20 h
3.1 h
2.3 h
8.04 h
3.1 h
2.5 h
+ 40 h
Exposure time (limit) on
weekly base
28 h
+ 40 h
11.31 h
33 h
12.42 h
10 h
32 h
12.42 h
10.11 h
+ 40 h
DiBO n.v. 58