Operating The Ocs2; Symbols - Integra OCS2 Manuel D'utilisation

Operating the OCS2

Symbols

Symbols Description
Volume - Adjusts the output active tone intensity
Volume Adjustment - Direction of rotation to amplify active tone
Polarity - Allows switching of the leading edge waveform polarity
Pulse Duration - Knob that determines the length of the pulse applied.
Measured in milliseconds
Pulse Rate - Knob that determines the pace at which the pulses are
generated. Measured in Hertz
mA PEAK - Milliamperes (measured from baseline to peak)
Output - Output receptacles of the OCS2.
Output Current mA PEAK - Display of the actual current being applied
through the output. Milliamperes (measured from baseline to peak)
Battery Level - Display of the battery charge for device functionality
Battery Level Indicator - LEDs that convey the battery charge that
remains to the user. All LEDs lit indicates a full charge. None of the
LEDs lit indicates that battery replacement is necessary.
RANGE - Switch that toggles the output being controlled between the
LOW and FULL settings
LOW - Low output adjustment (0 - 1.0 mA Peak)
FULL - Full output adjustment (0 - 10.0 mA Peak)
Start - Begins stimulation through the output receptacles
OSC2 Operator's Manual
5