Cleaning The Machine; Safety Thermostat - Manual Rearming; Correct Product Disposal - Bezzera MAGICA Manuel D'instructions

Table des Matières

Publicité

Les langues disponibles
  • FR

Les langues disponibles

BEZZERA MAGICA - MITICA
MOD.

6.2 Cleaning the machine

Warnings: For the best results and in
compliance with current regulations,
change the water contained in the
boiler and pipings at every daily start-
up of the machine.
These advices are indicative, the maintenance and
cleaning schedules depend on the use of the ma-
chine.
After each use
1) Clean the steam nozzle.
2) Clean the filter holder and the filters.
Daily
1) Clean the cup holding grid and the drain ba-
sin.
2) Clean the body.
3) Clean the group's gasket with the brush sup-
plied.
4) Wash the group as follows: hook the filter hold-
er with the blind filter supplied to the group and
initiate output for a few times.
5) Immerse the filter holder and the filters in hot wa-
ter for a few minutes to dissolve the grease of the
coffee, use a cloth or sponge to remove it.
For washing and cleaning operations,
do not use solvents, detergents or abra-
sive sponges but only specific products
for coffee machines. Wash the body us-
ing a cloth soaked in water and/or neutral deter-
gents, and dry the surfaces well prior to connect
the machine to the electric line again. Use water to
wash the cup holding grid and the drain basin.
Use water and neutral detergents to clean the tank
after removing it. When finished rinse thoroughly.
Replace the tank and insert the silicon tubes.
6.3 Safety thermostat - Manual re-
arming
Warning!
scribed below is only relevant to
an installing technician who is
authorised by the manufacturer.
While the machine is working, the boiler resistance
may overheat and, cutting off power, sets off the
safety thermostat that prevents any further damage
to the boiler. To restore normal operations, resolve
The
operation
the malfunction that triggered the safety thermostat
and restore normal conditions by pressing the red
button (RESET) (Fig. 08).

6.4 Correct product disposal

(electrical and electronic waste)
(Applicable in the European Union countries and
those countries with separate waste collection sys-
tems).
The sign carried on the product or on its
documentation indicates that the prod-
uct must not be disposed of with other
domestic waste at the end of its life cy-
cle. To avoid any damage to the environment or to
health, caused by unsuitable waste disposal, the
user is asked to separate this product from other
types of waste and to recycle it responsibly to help
the sustainable recycling of material resources.
Domestic users are invited to contact the dealer
where the product was purchased or the local of-
fice in charge of this matter for all the information
relating to separate waste collection and recycling
for this type of product.
Company users are invited to contact their own
supplier to check the terms and conditions of the
purchase contract.
This product must not be disposed of together with
other commercial waste.
de-
30

Publicité

Table des Matières
loading

Ce manuel est également adapté pour:

Mitica

Table des Matières