Scheppach CCS165-20ProS Traduction Des Instructions D'origine page 27

14. Troubleshooting
The table below contains a list of fault symptoms and explains what you can do to remedy the problem if your equipment
fails to work properly. If the problem still persists after working through the list, please contact your nearest service work-
shop.
Fault
Device does not start
Motor stops during operation
Reduced power
 www.scheppach.com /  service@scheppach.com /  +(49)-08223-4002-99 /  +(49)-08223-4002-58
Possible cause
Battery empty
On/off switch defective
Motor defective
Battery empty
Battery not inserted correctly
Battery defective
Battery depleted
Battery not fully charged
Remedy
Check the battery, have it repaired by a certified elec-
trician if necessary
Repair by an authorised service centre
Repair by an authorised service centre
Charge battery
Re-insert battery
Clean contacts, replace original battery
Replace battery
Charge battery
GB | 27