Pc Mode Menu System; Pc Position Menu; Autoposition; H (Horizontal) Position - Telefunken TF3236HX880LU Mode D'emploi

Table des Matières

Publicité

Les langues disponibles

Les langues disponibles

In source menu, highlight a source by pressing
the " " or " " buttons and switch to that mode
by pressing the " " button. Source options are;
TV , DTV/USB , EXT-1 , EXT-2 , FAV , HDMI-1 ,
HDMI-2 , YPbPr or PC-VGA .
Note : Once you have connected optional equipment
systems to your TV, you should select the required
input to view pictures from that source.

PC Mode Menu System

See "Connecting the LCD TV to a PC" section
for connecting a PC to the TV set.
For switching to PC source, press the "SOURCE"
button on your remote control and select PC
input. You can also use the "Source" menu to
switch to PC mode.
Note that PC mode menu settings are available only
while the TV is in PC source.

PC Position Menu

Select the first icon by pressing the " " or
" " buttons. PC Position menu appears on
the screen:

Autoposition

If you shift the picture horizontally or vertically
to an unwanted position, use this item to put
the picture into correct place automatically.
A02_[GB]_MB36_HDIDTV-MPEG4_BRONZE8_32880W_1810UK_10065239-50156446.indd 39
A02_[GB]_MB36_HDIDTV-MPEG4_BRONZE8_32880W_1810UK_10065239-50156446.indd 39
This setting therefore automatically optimizes
the display.
Select Autoposition item by using the " " or " "
buttons. Press OK or the " ", " " buttons
Warning : Please ensure auto adjustment is
performed with a full screen image to ensure
best results.

H (Horizontal) Position

This item shifts the image horizontally to right
hand side or left hand side of the screen.
Select the H Position item by using the " "
or " " buttons. Use the " " or " " buttons to
adjust the value.
V (Vertical) Position
This item shifts the image vertically towards the
top or bottom of the screen.
Select V Position item by using the " " or "
" buttons. Use the " " or " " buttons to adjust
the value.

Phase

Depending on the resolution and scan frequency
that you input to the TV set, you may see a hazy
or noisy picture on the screen. In such a case
you can use this item to get a clear picture by
trial and error method.
Select the Phase item by using the " " or "
" buttons. Use the " " or " " buttons to adjust
the value.

Dot Clock

Dot Clock adjustments correct the interference
that appear as vertical banding in dot intensive
presentations like spreadsheets or paragraphs
or text in smaller fonts.
Select the Dot Clock item by using the " " or "
" buttons. Use the " " or " " buttons to adjust
the value.

PC Picture Menu

For adjusting PC picture items, do the
following:
Press the " " or " " buttons to select the second
icon. PC Picture menu appears on the screen.
Brightness, Contrast, Colour and Colour
Temperature settings in this menu are identical
to settings defi ned in TV picture menu under
"Analogue TV Menu System".
Note : If you set Colour Temp as User, you can defi ne
R, G, B settings manually.
English - 90 -
26.09.2009 17:00:40
26.09.2009 17:00:40

Publicité

Chapitres

Table des Matières
loading

Table des Matières