Tv Setup; Setup; Confi Guration; Digital Audio Out - Telefunken TF3236HX880LU Mode D'emploi

Table des Matières

Publicité

Les langues disponibles

Les langues disponibles

It is required to subscribe to a pay channel
company to view the pay channels of the Digital
Terrestrial broadcasting.
Obtain the Conditional Access Module (CAM)
and the viewing card by subscribing to a pay
channel company, then insert those to the
Television using the following procedure.
• Switch off the TV and unplug it from the
mains.
• Insert the CAM, and then the viewing card to
the slot.
• The CAM should be correctly inserted, it is
impossible to insert fully if reversed. The CAM
or the TV terminal may be damaged if the CAM
is forcefully inserted.
• Connect the TV to the mains supply, switch
on and then wait for few moments until the
card is activated.
• Some CAMs may require the following set up.
Please set the CAM by entering the DIGITAL
TV menu "Common Interface" , then press the
OK button (CAM set up menu is not displayed
when it is not required.)
• To see the "viewing contract information"
screen enter DIGITAL TV; press the M button,
then highlight Common Interface and press
the OK button.
• When no module is inserted, "No Common
Interface module detected" message
appears on the screen.
• For more details of the settings, refer to the
module instruction manual.
NOTE: Insert or remove the CI module only when the
TV is in STANDBY mode or SWITCHED OFF.

TV Setup

You can use this item to display the TV
functions.
The digital TV Setup menu screen is accessed
from the main menu. Press the M button to
display the main menu and use or buttons to
highlight "TV Setup". Press the OK button to
display the TV Setup menu screen.
You can find detailed information for all
menu items in section "Analogue TV Menu
System".
A02_[GB]_MB36_HDIDTV-MPEG4_BRONZE8_32880W_1810UK_10065239-50156446.indd 26
A02_[GB]_MB36_HDIDTV-MPEG4_BRONZE8_32880W_1810UK_10065239-50156446.indd 26

Setup

The adjustments in this menu are given as the
following:
Confi guration
You can confi gure the settings of your TV. Select
Confi guration from Setup menu and press OK
to view this menu. Press the RETURN button
on the remote control to exit.

Digital Audio Out

Use this setting to defi ne digital audio out signal
type. Use the " " or " " buttons to set Digital
audio out as AC3 or PCM.
If your selected channel includes AC3 sound
stream, you should connect your TV to external
equipment by using Spdif out of your TV to
enable the sound output. If you have no external
sound equipment, please select Digital Audio
Out as "PCM" by using the " " or " " buttons.

AC3 Audio(*)

In the Confi guration Menu, highlight the AC3
Audio item by pressing the " " or " " buttons.
Use the " " or " " buttons to set the AC3 Audio
as On or Off.
If the channel that you are watching supports
AC3 Audio, turn this setting on.
(*) AC3 Audio function will not be available for UK.

Hard of Hearing (*)

Use the " " or " " buttons to select "Hard of
Hearing" and then press the " " or " " buttons
to set this setting as On or Off.
If the broadcaster enables any special signal
concerning the audio, you can set this setting
as ON to receive such signals.
English - 77 -
26.09.2009 17:00:32
26.09.2009 17:00:32

Publicité

Chapitres

Table des Matières
loading

Table des Matières