Ext Out; Full Mode (Optional); Install Menu; Program - Telefunken TF3236HX880LU Mode D'emploi

Ext Out

Press the " " or " " buttons to select Ext Out.
Use the " " or " " buttons to set the Ext Out
as On or Off.
Note :
For copying from a DVD or VCR device, you should
choose desired source from source menu and turn
"On" to EXT Out from feature menu.

Full Mode (optional)

If you connect a device via HDMI or YPbPr
connectors and set 1080i/1080P resolutions,
Full Mode item will be visible.You can set Full
Mode as 1:1 or Normal by using " " or " ".If you
select 1:1, screen ratio will be adjusted correctly.
If you set Normal, screen ratio may expand.

Install Menu

Program

Press the " " or " " buttons to select Program.
Use the " " or " " buttons to select the program
number. You can also enter a number using the
numeric buttons on the remote control. There
is a 200 programmes storage between 0 and
199.

Band

The Band can be selected either C or S. Press
the " " or " " buttons to set the Band.

Channel

Channel can be changed by the " " or " "
buttons or numeric buttons.

Colour System

Press the " " or " " buttons to select Colour
System. Use the " " or " " buttons to change
the colour system to PAL, PAL 60, SECAM or
AUTO.
A02_[GB]_MB36_HDIDTV-MPEG4_BRONZE8_32880W_1810UK_10065239-50156446.indd 37 A02_[GB]_MB36_HDIDTV-MPEG4_BRONZE8_32880W_1810UK_10065239-50156446.indd 37

Sound System

Press the " " or " " buttons to select Sound
System. Press the " " or " " buttons to change
the sound system to BG,DK, I, L or L'.

Fine Tune

Press the " " or " " buttons to select Fine
Tune. Press the " " or " " buttons to adjust
the tuning.

Search

Press the " " or " " buttonsto select Search.
Use the " " or " " buttons to start programme
searching. You can also enter the desired
frequency using the numeric buttons while the
Search item is highlighted.

Store

Press the " " or " " buttons to select Store.
Press " " or the OK button to store the settings.
" Stored... " will be displayed on the screen.

Install Menu in AV Modes

The following screen appears in the install menu
when the TV is in AV modes. Note that limited
options will be available. Switch to TV mode for
viewing complete version of the Install menu.
Colour System
Press the " " or " " buttons to select Colour
System . Use the " " or " " buttons to change
the colour system to PAL, SECAM, PAL60,
AUTO, NTSC 4,43 or NTSC 3,58.
Store
Press the " " or " " buttons to select Store
Program . Press " " or the OK button to store
the settings. " Stored... " will be displayed on
the screen.
English - 88 -
26.09.2009 17:00:39 26.09.2009 17:00:39