Source; Program; Swap; Sleep Timer - Telefunken TF3236HX880LU Mode D'emploi

Select PIP Position item by using the " " or
" " buttons. Use the " " or " " buttons to adjust
PIP position.
Positions available are: Bottom Right,Bottom
Left, Top Left and Top Right.

Source

PIP Source setting enables you to select the
source of the sub picture.
Select PIP Source item by using the " " or
" " buttons. Use the " " or " " buttons to set
PIP source.

Program

This setting will be unavailable to be used.

Swap

Select Swap item by using the " " or " "
buttons. Use the " " or " " buttons to set. This
function enables to swap between the main and
the PIP picture.
Note : See Appendix E for all PIP/PAP modes.

Sleep Timer

Press the " " or " " buttons to select Sleep
Timer . Use the " " or " " buttons to set the
Sleep Timer.
The timer can be programmed between Off and
120 minutes in steps of 10 minutes.
If Sleep Timer is activated, at the end of the
selected time, the TV goes automatically to
standby mode.

Child Lock

Press the " " or " " buttons to select Child
Lock .
Use the " " or " " to turn the Child Lock On
or Off . When On is selected, the TV can only
be controlled by the remote control handset. In
this case the control panel buttons (except the
STANDBY button) will not work.
Hence, if one of those buttons is pressed, Child
Lock On will be displayed on the screen when
the menu screen is not visible.

Language

Press the " " or " " buttons to select Language .
Use the " " or " " buttons to to select the
Language .

Default Zoom

While zoom mode is set as AUTO , the TV will set
the zoom mode in accordance with the signal
A02_[GB]_MB36_HDIDTV-MPEG4_BRONZE8_32880W_1810UK_10065239-50156446.indd 36 A02_[GB]_MB36_HDIDTV-MPEG4_BRONZE8_32880W_1810UK_10065239-50156446.indd 36
of the broadcast. If there is no WSS or aspect
ratio information, the TV will then use this setting
to adopt. Press the " " or " " buttons to select
Default Zoom . You can set Default Zoom to
Panoramic , 16:9 , 4:3 or 14:9 by pressing the
" " or " " buttons.
The
Note : Default Zoom feature will not be available
while in Digital Tv mode.

Blue Background

If the signal is weak or absent, the TV will
automatically change to a blue screen. To
enable this, set Blue Background to On .
By pressing the " " or " " buttons, select Blue
Background . Press the " " or " " buttons to
turn the Blue Background On or Off .

Menu Background (optional)

Press " " or " " button to select Menu
Background . You can set menu background
level by pressing " " or " " button.

Backlight

This setting controls the backlight level. Select
Backlight by pressing the " " or " " buttons.
Press the " " or " " buttons to set Backlight to
Auto, Medium , Maximum or Minimum .

Menu Timeout

To set a specific display timeout for menu
screens, set a value for this option.
Press the " " or " " buttons to select Menu
Timeout . Use the " " or " " buttons to change
menu timeout to 15 sec , 30 sec or 60 sec .

Teletext Language

Press the " " or " " buttons to select Teletext
Language . Use the " " or " " buttons to change
Teletext Language to West, East , Turk/Gre ,
Cyrillic, Arabic or Persian .

HDMI PC Full Mode (optional)

If you want to view PC screen in HDMI mode
by using external connection, HDMI PC FULL
MODE option should be On to adjust the screen
ratio correctly. This item might be inactive in
some resolutions.
Note: If you connect an HDMI device and switch the
TV to HDMI mode, this feature will be visible (except
for 1080i/1080P resolution).
English - 87 -
26.09.2009 17:00:38 26.09.2009 17:00:38