Program Table; Name; Move; Delete - Telefunken TF3236HX880LU Mode D'emploi

Program Table

Select Program Table by pressing the " " or
" " buttons.
By moving the cursor in four directions you can
reach 20 programmes in the same page. You
can scroll the pages up or down by pressing the
navigation buttons to see all the programmes
in TV mode (except for the AV modes). By
cursor action, programme selection is done
automatically.

Name

To change the name of a programme, select the
programme and press the RED button.
The fi rst letter of the selected name will be
highlighted. Press the " " or " " buttons to
change that letter and the " " or " " buttons to
select the other letters. By pressing the RED
button, you can store the name.

Move

Select the programme which you want to insert
by navigation buttons. Press the GREEN
button. By navigation buttons move the selected
programme to the decided programme space
and press the GREEN button again.

Delete

To delete a programme, press the YELLOW
button. Pressing the YELLOW button again
erases the selected programme from the
programme list, and the following programmes
shift one line up.

APS (Auto Programming System)

When you press the BLUE button for starting
automatic tuning, Auto Programming System
menu will appear on the screen:
A02_[GB]_MB36_HDIDTV-MPEG4_BRONZE8_32880W_1810UK_10065239-50156446.indd 38 A02_[GB]_MB36_HDIDTV-MPEG4_BRONZE8_32880W_1810UK_10065239-50156446.indd 38
Country
Press the " " or " " buttons to select your
country. If you want to exit from A.P.S. function,
press the BLUE button.
When you press OK or RED button for starting
automatic tuning, all stored programmes will
be erased and the TV will search for available
channels. During the search, the following OSD
will be displayed:
Whenever you press the BLUE button, APS
function stops and Program Table appears on
the screen.
If you wait until the end of APS, Program Table
will be displayed with the programmes found
and located.

Source Menu

Press the " " or " " buttons and select the
sixth icon. Then press " " or the OK button. the
Source menu appears on the screen:
English - 89 -
26.09.2009 17:00:40 26.09.2009 17:00:40