Input Selection; Basic Operations; Operation With The Buttons On The Tv; Volume Setting - Telefunken TF3236HX880LU Mode D'emploi

Input Selection

Once you have connected external systems
to your TV, you can switch to different input
sources.
• Press "SOURCE" button on your remote
control for directly changing sources.
or,
• Select the option "Source" from the main menu
by using the " " or " " buttons. Use then the " " or
" " buttons to highlight an input and press the
" " button to select it.
Note : You can mark desired source options by
pressing the OK button. Therefore, when
button is pressed, only the marked source options will
be available (except for the TV source).

Basic Operations

You can operate your TV using both the
remote control and onset buttons.

Operation with the Buttons on the TV

Volume Setting

• Press the " " button to decrease the
volume or the
volume, so a volume level scale (slider) will
be displayed on the screen.

Programme Selection

• Press the " P/CH + " button to select the next
programme or the " P/CH - " button to select the
previous programme.

Viewing Main Menu

• Press " " / "
time to view main menu. In the Main menu,
select sub-menu using " P/CH - " or " P/CH + "
buttons and enter the sub-menu using the "
" or " " buttons. To learn the usage
A02_[GB]_MB36_HDIDTV-MPEG4_BRONZE8_32880W_1810UK_10065239-50156446.indd 19 A02_[GB]_MB36_HDIDTV-MPEG4_BRONZE8_32880W_1810UK_10065239-50156446.indd 19
"SOURCE"
button to the increase
" buttons at the same
English - 70 -
of the menus, refer to the menu system
sections.

AV Mode

• Press the " TV/AV " button in the control panel
on the TV to switch between AV modes.

Operation with the Remote Control

• The remote control of your TV is designed
to control all the functions of the model you
selected. The functions will be described in
accordance with the menu system of your
TV.
• Functions of the menu system are described
in the following sections.
Volume Setting
• Press the "V+" button to increase the volume.
Press the "V-" button to decrease the volume.
A volume level scale (slider) will be displayed
on the screen.
Programme Selection (Previous or Next
Programme)
• Press the " P - " button to select the previous
programme.
• Press the " P + " button to select the next
programme.

Programme Selection (Direct Access)

• Press the numeric buttons on the remote
control to select programmes between 0
and 9. The TV will switch to the selected
programme. To select programmes between
10 - 299 (for IDTV) or 10-199 (for analogue),
press the numeric buttons consecutively (e.g.
for programme 27, fi rst press 2 and then 7).
When the pressing time is due for the second
numeric button, only the fi rst digit programme
will be displayed. The limit of the delay time
is 3 seconds.
• Press directly the programme number to
reselect single digit programmes.
26.09.2009 17:00:29 26.09.2009 17:00:29