Operation - Optelec ClearView+ Guide De L'utilisateur

All manuals and user guides at all-guides.com
+
Optelec ClearView User manual

4 Operation

Open the enclosed operation sheet for an overview of the control panel.
The sheet is meant to support this text.
Keep your hands on the wrist support at the front of the table when using
+
the ClearView . It provides easy access to the control buttons and steady
movement of the table.
Switching On / Off
Press the On/Off button to power both the system and monitor. The
+
ClearView will start up in the same colour mode as it was powered
+
off. A non-ClearView monitor needs to be switched on/off separately.
Adjusting magnification
Turn the zoom button, at the centre of the table, clockwise to increase
magnification and counter-clockwise to decrease the magnification.
Autofocus lock
+
The ClearView features an automatic focusing system. The system
automatically focuses on any material placed under the camera to
+
produce a sharp onscreen image. When the ClearView is switched
on, the system will start in the autofocus mode.
+
Pressing the autofocus button stops the ClearView from continuously
focusing. This is useful for tasks such as writing, painting or enjoying
crafts. When the autofocus is in the locked mode, a red light on the
central control button (mode / zoom) will be illuminated. To turn
autofocus back on, simply press the autofocus button again. The red
indicator light will turn off.
Page 6 of 15