elco TRIGON XL 300 Notice D'installation Et D'emploi page 42

Maintenance
Cleaning the dirt collector
Inspection of combustion chamber
Cleaning the dirt collector
•
Remove the syphon from the con-
densate connection;
•
Remove the cap (5) from the dirt
collector on the bottom of the sy-
phon (4);
•
Clean it with plenty fresh water;
•
Close the cap of the dirt collector
•
Reconnect the syphon to the
condense connector.
Inspection of combustion chamber
The sight glass (6) is positioned on
the left hand side of the boiler.
•
Inspect the combustion cham-
ber by viewing through the sight
glass.
42
All manuals and user guides at all-guides.com
4
5
6