Tractel Davimast Manuel D'installation, D'entretien Et D'emploi page 19

Proceed to check the stopping of the weight following:
1. Lift the weight with the Carol™
2. Release the crank handle;
3. The locking of the weight must be done immediately
without slipping;
4. Wait three minutes; and
5. Bring the weight back down.
NOTE the locki
a ter se eral olts or i the wei ht oes dow
three mi ute delay, the product must ot e used a d
must be returned to Tractel
1 2 .5 . ec in t e
a ol an
anc o it
The Davimast brackets are supplied with their system.
or the systems check, see the correspo di
Position the bracket so that all sides of it can be
inspected.
1 2 .5 .1 . ec in t e a in
The bracket must have the following markings at least:
• The manufacturer's or supplier's name;
• The e uipme t re ere ce
• The batch or serial number;
• The e uipme t sta dard ollowed y the year o
reference; and
• The logo; read the instruction manual.
NOTE: a y marki
e uipme t must e take out o ser ice.
1 2 .5 .2 . ec in t e co p l o
p e ent
The Davimast bracket must have the following at least:
• The Davimast bracket;
• One pin; and
• One safety pin connected to the bracket by means
of a cablet.
1 2 .5 .3 . ec in t e ene al con ition o t e
ac et
spect each side o the racket a d more speci cally
check whether:
• The bracket is deformed in any way;
• The mounting holes are deformed in any way;
• The pins and safety pins are deformed in any way;
• There is any corrosion;
TS winch;
is ot immediate, i it occurs
e ore the
or an authorised repairer.
®
ac et loc o
o le
otation
chapters.
oes missi , the a ected
co ponent a e
IMPORTANT: Check all of the bolts present on
each bracket have been tightened. If a Nylstop lock
ut is remo ed, it must e replaced with a ew ylstop
lock nut.
NOTE: Non-compliance with the above check
does ot ecessarily mea
decommissio ed, ut the de ice must
until it has been repaired by Tractel or an authorised
repairer.
1 3 . i e pan
Tractel te tile PP such as har esses, la yards,
®
ropes a d e er y a sor ers, Tractel
such as stopca le a d stop or
Blocfor™ self-retracting fall arrest devices and Tractel
lifelines and anchor devices may be used from their
manufacturing date providing that they:
• Are used normally in accordance with the usage
recommendations of this manual;
• der o a periodic i spectio , which must
performed at least once a year by an authorised and
uali ed tech icia . O completio o this periodic
i spectio , the product must e certi ed i writi
t to e recommissio ed a d
• Fully comply with the storage and transport conditions
set out in this manual.
As a e eral rule a d su ect to impleme ti
co ditio s or use stated a o e, their ser ice li e may
exceed 10 years.
1 4 . o
he disposi o the product, the arious compo e ts
must be recycled by separating and sorting metal
and synthetic components. These materials must
be recycled through specialist organisations. When
disposi o the product, a
dismantle and separate the component parts.
o ponent
Product structure
ods, spacer, screws,
pulley shaft
Pulley, o e rotatio ri
the e uipme t is to
ot e used
mechanical PPE
®
all arrest de ices,
the
ct i po al
uali ed perso should
T eat a a a te o t e
t pe
Aluminium/steel
Steel
Aluminium/polymer
19
GB
e
®
e
as