Publicité
Les langues disponibles
Les langues disponibles
User's manual
07/2015
Aqua-TR
■ Test cycle
Before performing a test, first check the Aqua-TR drawer's
presence.
■ By mean of the measuring cup supplied, pour in the hopper 1 litre
approx. of grain, and press key
Excess orifice
Note:
The use of the supplied measuring cup is highly recommended, so
as to carry out the test with an optimum grain sample volume, and
therefore to obtain the best accuracy.
A level detection cell enables the Aqua-TR to check if the grain
sample size is sufficient for performing a measurement.
An excess orifice prevents any overflowing of the grain
The following screen is then displayed:
Never try to operate manually the hopper trap door: in case of
incomplete grain flow, use the "Vibration" option of the l'Aqua-TR.
In order to perform a cycle with the vibrator, press key
hourglass icon appears.
Note:
For any particular configuration (vibrator automatically selected for
one or more calibrations), please contact Chopin Technologies.
.
Level
detection
until the
GB
67
Publicité
