Publicité
Les langues disponibles
Les langues disponibles
GB
Shaped seal
2 round seals
Holder
Side view of seals
Holder
2 round seals
Shaped seal
Steam shower
52
10.8
Seals of the steam shower
1. Remove seals that are defective or very dirty from the holder of the steam
shower.
2. Place two new round seals in the grooves in the holder.
3. Place the shaped seal onto the holder with the small opening facing for-
wards, and push it onto the steam shower until it stops.
The shaped seal must be in contact with the small opening in the steam
shower. The large opening faces away from the steam shower.
4. Check that the seals fit securely.
Maintenance by the user
Publicité
