Publicité
Les langues disponibles
Les langues disponibles
GB
Display
Temperature display
44
-
Also comply with the manufacturer's instructions for the products used.
-
Take into account that the exposure times of the products may change
due to heat.
•
Always monitor the treatment results already achieved.
9.6
Setting treatment time
•
Set the desired treatment time using the 10 and 1 buttons:
-
Button 1: input in 10-minute increments,
-
Button 10: input in 1-minute increments.
The display shows the treatment time selected.
Setting treatment temperature
CAUTION – Risk of damage to hair
The exposure time of the products also depends on the treatment tempera-
ture selected and must be taken into account by professionals when deter-
mining the treatment temperature appropriate for the product used.
Always monitor the treatment results already achieved.
•
Use the
-
The temperature setting selected is displayed on the 5-level temperature
scale.
Deselecting programme / resetting to start position:
Start position
•
You can delete the values entered and reset the appliance to the start posi-
tion using the CLEAR button.
-
The treatment is cancelled.
Starting treatment
•
Press the START button.
-
Warming-up phase: the temperature symbol is lit (approx. 2 minutes).
-
The display shows the remaining treatment time.
-
By pressing the START button again, the treatment time that has al-
ready passed (MEMO function) is displayed.
•
Press the ION button to switch ionisation on and off. When the function is
switched on, the LED in the button is lit.
In chapters "Changing treatment settings" on page 46 and "End of treatment /
performing follow-up treatment" on page 46 you can read how to change set-
tings or start a follow-up treatment.
Manual mode
+
-
and
buttons to select the desired temperature setting.
Performing treatment
Publicité
