Bosch GVCI-MX Mode D'emploi page 16

en en 16 | GVCI-MX | Cleaning and maintenance
8.2 Recovering the VCI software
As a result of a power failure or a communications error
during a software update, the GVCI-MX software may be-
come corrupted. You may see several symptoms such as
error messages directing you to go to RECOVERY mode
or an inability to connect to a detected GVCI-MX.
The following two error messages generally occur during
GVCI-MX Tester Software download. If you see either of
these messages, perform the Recovery Procedure.
R
"Error reprogramming the VCI. Go to Recovery Mode."
R
"There was a problem reprogramming the VCI"
8.3 Spare and wearing parts
Component
OBD-Cable DLC J1962, GVCI-MX, 1.5 m
USB A to USB B, 3 m cable
1)
Wireless Adapter 802.11n
1)
Wearing part
1)
8.4 Recovery procedure
Use the following procedure to recovery the software on
the VCI..
1. Start the VCI Manager software by clicking the VCI
Manager icon on your desktop. Your GVCI-MX must
be connected via USB or it will not be recognized.
2. When the GVCI-MX is detected by the VCI Manager
software, click the VCI icon and choose the tab "VCI
Update".
3. Click the Recover button.
i
The Recovery Procedure removes any embedded
application software loaded on the GVCI-MX. Your
network settings will be retained.
4. Select the latest version of the GVCI-MX Recovery
Image and click Start Update. Do not unplug the
GVCI-MX from the PC or remove power from the
GVCI-MX during the recovery process.
5. When you see the message indicating that the
GVCI-MX will automatically restart, click OK. The VCI
Manager software switches automatically to the VCI
Explorer tab, and your GVCI-MX appears when it has
finished the restart and Power On Self Test (POST).
|
1 689 989 447 2020-03-02
9.
9.1
In the event of lengthy periods of non-use:
¶
9.2
¶
¶
¶
¶
Part Number
9.3
1699.200.366
1)
F-00K-108-653
1. Disconnect the GVCI-MX from the voltage supply.
1687.010.590
2. Dismantle the GVCI-MX and sort out and dispose of
Only for EC countries:
Decommissioning
Temporary shutdown
Disconnect the GVCI-MX from the voltage supply.
Change of location
If the GVCI-MX is passed on, all the documentation
included in the scope of delivery must be handed over
together with the unit.
The GVCI-MX is only ever to be transported in the
original or equivalent packaging.
Unplug the electrical connection.
Heed the notes on initial commissioning.
Disposal and scrapping
the different materials in accordance with the ap-
plicable regulations.
GVCI-MX, accessories and packaging should
be sorted for environmental-friendly recy-
cling.
¶
Do not dispose GVCI-MX into household
waste.
The GVCI-MX is subject to the European
directive 2012/19/EC (WEEE).
Dispose of used electrical and electronic
devices, including cables, accessories and
batteries, separately from household waste.
¶
Make use of the local return and collection
systems for disposal.
¶
Proper disposal of GVCI-MX prevents en-
vironmental pollution and possible health
hazards.
Bosch Automotive Service Solutions GmbH