Turn On The Ups; Test Function; Turn Off The Ups - INFOSEC UPS SYSTEM E4 700 Mode D'emploi

5.5

Turn On the UPS

5.5.1 With utility power connecting
4
For E 700/1000(S)/2000 UPS, press the "I" button for more than 1 second to turn on the UPS. For E
2000S, 3000 and 3000S UPS, set the Breaker on the rear panel to the "ON" position and press the "I"
button for more than 1 second to turn on the UPS. The UPS starts a self-test. Then the UPS switches into
the inverter mode and the "ON LINE" led, "INVERTER" led, "LOAD & BATTERY CAPACITY" leds light up.
5.5.2 Without utility power connecting
Even though utility power is connected to the UPS, the UPS still can be turned on by pressing the "I" button
for more than 1 second. The UPS starts a self-test. Then the UPS switches into the inverter mode and the
"BAT." led, "INVERTER" led, "LOAD & BATTERY CAPACITY" leds light up.
Note: In BY-PASS mode outlets are live when utility power and breaker are on. This can be
configured by monitoring software.
5.6

Test Function

You may test the correct operation of the UPS system by either pressing the On-Switch "I" or
disconnecting the input of the UPS system from the power supply.
5.7

Turn Off the UPS

5.7.1 In Inverter Mode
Press " " button for more than 1 second to turn off the UPS. The UPS starts a self-test. Then the UPS
switches into bypass mode and the UTILITY POWER led and BY-PASS led light up. At this time, the UPS
outlets might be live. Disconnect the utility power or set the Breaker (for E
to "OFF" position to turn off the output.
5.7.2 In Battery Mode
Press " " button for more than 1 second to turn off the UPS. Then the UPS starts a self-test. Then the UPS
will be turned off completely.
5.7.3 Audible Alarm Mute Function
If the alarm is too annoying in battery mode, you may press "I" button for more than 1 second to stop it.
When the battery is low, the alarm will be enabled to remind you to shutdown the load soon.
５４
Hot Line:
INFOSEC UPS SYSTEM - 4, rue de la Rigotière – 44700 Orvault – FRANCE - www.infosec.fr
tel : + 33 (0)2 40 76 15 82 - fax : + 33 (0)2 40 94 29 51 - hotline@infosec.fr - 09 05 04 205 12
4 4
2000(S), E 3000 and 3000(S))
4