Install The Ups; Rack-Mount Installation; Tower Installation - INFOSEC UPS SYSTEM E3 PRO 1000 RT Notice D'utilisation

2.2 Install the UPS

For safety consideration, the UPS is shipped out from factory without connecting battery
wires. Before install the UPS, please follow below steps to re-connect battery wires first.
Step 1

Remove front panel.

Rack-mount installation

This UPS can be mounted in the 19" rack chassis. Please follow below steps to position this
UPS.
Step 1


Tower installation

Step 1

INFOSEC UPS SYSTEM - 4, rue de la Rigotière - 44700 Orvault - FRANCE - www.infosec-ups.com
6
Hot Line – Tel + 33 (0)2 40 76 15 82 - Fax + 33 (0)2 40 94 29 51 - hotline@infosec.fr – 01 16 AA 59 204 03
Step 2

Connect the AC input and
re-connect battery wires.
Step 2

Step 3

Put the front panel back to the
unit.
Step 2


Step 3