Setting Up The Ups; Install The Ups; Rack-Mount Installation; Tower Installation - INFOSEC UPS SYSTEM E6 LCD RT Evolution Guide Utilisateur

2-2. Setting up the UPS

2-2-1. Install the UPS

For safety consideration, the UPS is shipped out from factory without connecting battery wires.
Before install the UPS, please follow below steps to re-connect battery wires first.
 Step 1  Step 2  Step 3
Connect the AC input and Put the front panel back to the
Remove front panel.
re-connect battery wires. unit.
This UPS can be either displayed on the desk or mounted in the 19" rack chassis. Please choose
proper installation to position this UPS.

Rack-mount Installation

 Step 1  Step 2

Tower Installation

 Step 1  Step 2  Step 3
INFOSEC UPS SYSTEM – 15 rue du Moulin – 44880 Sautron – France – www.infosec-ups.com
40
Hot Line Tel: +33 (0)2 40 76 15 82 – fax: +33(0)2 40 94 29 51 – hotline@infosec.fr – 04 17 AA 59 205 87