Faults Reference Code - INFOSEC UPS SYSTEM E6 LCD RT Evolution Guide Utilisateur

Standby
mode
Fault mode

3-7. Faults Reference Code

Fault event
Bus start fail
Bus over
Bus under
Bus unbalance
Inverter soft start fail
High Inverter voltage
INFOSEC UPS SYSTEM – 15 rue du Moulin – 44880 Sautron – France – www.infosec-ups.com
55
Hot Line Tel: +33 (0)2 40 76 15 82 – fax: +33(0)2 40 94 29 51 – hotline@infosec.fr – 04 17 AA 59 205 87
UPS is powered off without output
power, but the battery still can be
charged.
The UPS is in fault mode when no
output power is supplied from the
UPS and the fault icon flashes on the
LCD display, although the information
of UPS can be displayed in the
screen.
Fault Icon
code
01
02
03
04
11
12
Fault event
x Low Inverter voltage
x Inverter output short
x Battery voltage too high
x Battery voltage too low
x Over temperature
x Overload
Fault Icon
code
13 x
14
27 x
28
41 x
43