Kenwood KAX980ME Instructions page 3

Do not move or raise the mixer head with
l
an attachment fitted as the stand mixer
could become unstable.
Refer to your main stand mixer instruction
l
book for additional safety warnings.
This attachment features the Twist
Connection System
designed to fit directly on the
latest generation Kenwood Chef
models (identified as TYPE KVC,
KVL and KCC).
This attachment can also fit
KMix stand mixers featuring a
slow speed attachment outlet
(TYPE KMX).
To check that this attachment is
compatible with your stand mixer
you will need to ensure both
components feature the Twist
Connection System
If your stand mixer features the
Bar Connection System
you will also need an adaptor
before operation is possible. The
reference code for the adaptor is
KAT001ME. For more information
and how to order the adaptor visit
www.kenwoodworld.com/twist.
before using for the first
time
Wipe clean with a damp cloth. Do
l
not immerse in water.
Cleaning Brush
This brush is not suitable for use
l
directly on food. Please use this
brush to clean dried dough from
the attachment.
key
KAX980ME
a flat pasta attachment
b adjustable thickness knob
c cleaning brush
to assemble
and is
1 Lift off the slow speed outlet cover
2 With the attachment in the position
to use your pasta
maker
1 Make your pasta dough. Follow
2 Set the adjustable knob on the
.
3 Flatten a piece of dough to
4 Turn the stand mixer to speed 1
5 Pass the piece of dough through
6 Adjust the knob progressively from
7 Cut the rolled pasta into desired/
3
1.
shown, locate to the slow speed
outlet and rotate to lock in place
2.
one of the dough recipes supplied.
side of the pasta attachment to
number 0 by pulling the knob out
and turning.
approximately 1 cm thick and
sprinkle some flour between the
rollers.
(you will see the rollers turning).
the rollers repeating until you get
a smooth surface. (Folding the
dough in half across its width or
length between rollings will help to
achieve this).
0 to 9, each time re-feeding the
dough through the attachment
to achieve the desired thickness
3 (refer to pasta sheet thickness
chart). Pasta thickness using
settings 5 to 7 is recommended.
manageable pieces.
Use as required.