Adjusting The Viewfinder; Attaching The Viewfinder - Panasonic AG-CVF10G Mode D'emploi

Adjusting the viewfinder

Attaching the viewfinder

1
Confirm that the POWER switch of the camera is "OFF".
2
Connect the plug of the connecting cable to the VF connector on the camera.
Note
When connecting the plug of the connecting cable to the VF connector on the camera, push
it firmly in all the way.
3
Loosen the viewfinder left-right position anchoring ring of the camera.
4
Loosen the screw of the slide stopper, and then attach the viewfinder by sliding it in
the direction of the arrow.
After attaching the viewfinder, tighten the screw of the slide stopper.
Slide stopper
Tighten the screw of
the slide stopper.
5
Tighten the viewfinder left-right position anchoring ring of the camera.
Loosen the ring.
Viewfinder left-right
position anchoring ring
Tighten the ring.
E-8