Parts And Their Functions - Panasonic AG-CVF10G Mode D'emploi

Parts and their functions

  
PEAKING CHROMA CONTRAST BRIGHT
MIRROR B.LIGHT ZEBRA
L/R HIGH HIGH
ON
OFF NOR OFF
OFF
B/T LOW LOW
  
1 PEAKING control
Adjusts the outlines of the images in the viewfinder to make focusing easier. The setting of this control
has no effect on the output signal of the camera. The amount of the adjustment is increased when the
control is rotated clockwise.
2 CHROMA control
Adjusts the chroma of the color for the image in the viewfinder. The setting of this control has no effect
on the output signal of the camera. The colors become darker when the control is rotated clockwise.
3 CONTRAST control
Adjusts the contrast of the screen inside the viewfinder. The setting of this control has no effect on the
output signal of the camera. The contrast becomes stronger when the control is rotated clockwise.
4 BRIGHT (Brightness) control
Adjusts the brightness of the screen inside the viewfinder. The setting of this control has no effect on
the output signal of the camera. The images become brighter when the control is rotated clockwise.
5 MIRROR switch
Used when the images are to be reversed horizontally (left/right) or inverted vertically (top/bottom)
when the viewfinder barrel unit is flipped up or rotated.
L/R : The images are reversed horizontally (left/right) (when the viewfinder barrel unit is flipped up
and the LCD monitor is viewed directly).
OFF : The images are not reversed or inverted (when viewing using the eyepiece).
B/T : The images are inverted vertically (top/bottom) (when looking at the viewfinder pointed at the
subject).
6 B.LIGHT switch
Adjusts the brightness of the LCD monitor backlight.
HIGH : The backlight is made brighter than normal.
NOR : The backlight is set to the normal brightness.
LOW : The backlight is made darker than normal.
 

TALLY

 
   





E-6