Parts And Their Functions - Panasonic AG-VF5P Mode D'emploi

Parts and Their Functions

=
1
ZEBRA (Zebra Pattern) Switch
Displays a zebra pattern inside the viewfinder.
ON :Displays a zebra pattern.
OFF :No zebra pattern displayed.
The details of the display, such as the type of
zebra pattern, will differ depending on the camera
used with the viewfinder. Refer to the instruction
manual of the camera for details.
2
TALLY Switch
Controls the front tally lamp.
ON :Turns the tally lamp on.
OFF :Turns the tally lamp off.
3
PEAKING Knob
Adjusts the outlines of the images in the viewfinder to
make focusing easier. The setting of this control has no
effect on the output signal of the camera.
4
CONTRAST Knob
Adjusts the contrast of the screen inside the viewfinder.
The setting of this control has no effect on the output
signal of the camera.
5
BRIGHT (Brightness) Knob
Adjusts the brightness of the screen inside the
viewfinder. The setting of this control has no effect on
the output signal of the camera.
Front Tally Lamp
6
This lamp functions when the TALLY switch is at the ON
position, and it lights while the VTR unit is recording.
Also, flashes on and off as a warning indication, in the
same manner as the REC lamp, inside the viewfinder.
9
8
; 6 7
3 4 5
1 2
<
7
Viewfinder Crosswise Position Anchoring Ring
Loosen this ring to adjust the viewfinder position in the
crosswise direction.
8
Slide Stopper Screw
9
Eyepiece
:
Diopter Adjuster
Adjust this in such a way that the images will appear
most clearly on the viewfinder screen.
;
Connection Plug
<
Lock Button
=
Microphone Holder
>
Internal Lamps
The lamp and picture tube indications will differ
depending on the camera used with the viewfinder.
Refer to the instruction manual of the camera for details.
3
>
:
REC
BATT VTR
SAVE