Panasonic AG-CVF10G Mode D'emploi page 8

Parts and their functions
7 ZEBRA switch
Displays a zebra pattern inside the viewfinder.
ON : Displays a zebra pattern.
OFF : No zebra pattern is displayed.
The details of the display, such as the type of zebra pattern, will differ depending on the camera used
with the viewfinder.
Refer to the instruction manual of the camera for details.
8 TALLY switch
Controls the front tally lamp.
HIGH : M akes the front tally lamp brighter.
OFF : Turns the tally lamp off.
LOW : Makes the front tally lamp dimmer.
9 Slide stopper (Screw-in type)
Prevents the viewfinder from becoming detached from the camera when it is attached and slid to the
left or right. This is a screw-in type of slide stopper.
 Slide rail
Slide rail for installing to the camera unit.
 Eye cup
(Accessory) Installed on the viewfinder itself.
 Diopter adjuster ring
Adjusts the diopter when this ring is rotated so that the image is seen at its clearest.
 Lock ring
Used when detaching the eyepiece.
 Microphone holder
 Front tally lamp
Lights when the camera is shooting and the TALLY switch is set to HIGH or LOW.
Also, blinks while a warning is given.
The brightness of the front tally lamp is controlled by the setting of the TALLY switch (HIGH or LOW).
 Viewfinder barrel unit
Can be flipped up or rotated depending on how the camera is to be used.
 Eyepiece
 Lock lever
This lever is slid to flip up the viewfinder barrel unit.
 Connecting cable
Connected to the VF connector on the camera.
 Mirror
 LCD monitor
E-7
(continued)