Diopter Adjustment; Screen Adjustment - Panasonic AG-CVF10G Mode D'emploi

Adjusting the viewfinder

Diopter adjustment

1
Set the POWER switch of the camera to "ON". A picture will appear in the viewfinder.
2
Turn the diopter adjustment ring to adjust the diopter so that the viewfinder picture
can be clearly seen.

Screen adjustment

Adjust the condition of the viewfinder screen. (Page 6)
Brightness : Adjust the BRIGHT control.
Contrast : Adjust the CONTRAST control.
Chroma : Adjust the CHROMA control.
Contour : Adjust the PEAKING control.
CONTRAST control
1
Set the POWER switch of the camera to "ON".
2
Set the OUTPUT switch of the camera to "BAR".
3
Adjust the brightness and contrast of the image by turning the BRIGHT and
CONTRAST controls on the viewfinder, and the chroma of the image by the
CHROMA control.
Turning the PEAKING control makes the picture appear sharper, and it also
facilitates focusing.
PEAKING control
OFF
CHROMA control
BRIGHT control
(continued)
Diopter adjustment ring
• Diopter adjustment range:
–3.7 D to +1.1 D
PEAKING CHROMA CONTRAST BRIGHT
MIRROR B.LIGHT ZEBRA TALLY
L/R HIGH HIGH
ON
NOR OFF
OFF
B/T LOW LOW
E-12