Diopter Adjustment; Screen Adjustment - Panasonic AJ-CVF100G Mode D'emploi

Adjusting the Viewfinder

Diopter Adjustment

1
Set the POWER switch of the camera to "ON". A picture will appear in the viewfinder.
2
Turn the diopter adjustment ring to adjust the diopter so that the viewfinder picture
can be clearly seen.

Screen Adjustment

Adjust the condition of the viewfinder screen.
Brightness: Adjust the BRIGHT control.
Contrast: Adjust the CONTRAST control.
Chroma: Adjust the CHROMA control.
Contour: Adjust the PEAKING control.
PEAKING control
CONTRAST control
1
Set the POWER switch of the camera to "ON".
2
Set the OUTPUT switch of the camera to "BAR".
3
Adjust the brightness and contrast of the image by turning the BRIGHT and
CONTRAST controls on the viewfinder, and the chroma of the image by the
CHROMA control.
Turning the PEAKING control makes the picture appear sharper.
A sharper picture facilitates focusing the lens.
<Note>
Primary colors (red, blue and green) may be seen when moving eye position in the
viewfinder. (This is not a failure.)
(Continued)
CHROMA control
BRIGHT control
Diopter adjustment ring
PEAKING CHROMA CONTRAST BRIGHT
E-10